Direct Service

Top Benefits of Using AG Track Systems

 http://www.tuffstuffaustralia.com.auMost industries are moving from using wheels in earth moving vehicles to track systems. That is because track systems offer greater versatility and high stability. In farming, there can be no system that will provide more traction.

One of these track systems is the AG track systems, which come with the following features:

1. Traction

It is only on the recommended track system that your earth moving vehicle can perform optimally at full power. You affect the level of traction control when you have to either slow down or block one track to turn your earthmoving vehicle, which is common in two-track earth moving vehicles.

You can opt to change to four-track systems to keep the grounds you are working on in the best condition after the turns as your earth moving vehicle will distribute evenly and more efficiently its power from the tracks to the ground. This process reduces chances of skid and slip, and your earth moving vehicle consumes less energy.

2. Comfort

Using recommended track systems will raise the stability of your earthmoving vehicles which further enhances comfort. You now also can work on tough terrains and other areas that you could not access with a wheeled earth-moving vehicle. Excellent stability is also critical for operational safety.

3. Floatation

Using dual wheels is quite limiting as some parts of Australia have restrictions of the earth moving vehicle width you should use. With the right choice of track systems, you can avoid limiting your applications to only areas that have these width restrictions. Such track systems also provide high flotation with minimal interference on earthmoving vehicle width.

Depending on your area of specialisation, you can ask your undercarriage parts provider to supply you with a track system that can offer a footprint of your liking.

One of the notable advantages of using AG track systems is that they reduce the impact that your earth moving vehicle has on the ground. Look for the above features when you are choosing track systems to find the best for your vehicle.

October 14, 2017 at 1:00 amDirect Service

Get in the Shade: How Sunscreens Can Protect Your Home

Small houseSome people like to draw their curtains during summer to take advantage of the natural light that can illuminate their home. However, when the sun makes your house too warm, the existence of a building sunscreen, whether by your windows or near the roof, can provide you control over how much light and warmth gets into your home.

You also use curtains to provide you and your family some privacy at night. However, curtains can be burdensome to clean and may fade over time due to exposure to the sun. One option that can provide you control over your privacy is to add sunscreens to the windows of your home.

Here are some other advantages of installing sunscreens:

  • With sunscreens, you can have shade when you need it, and this is especially beneficial during summer. When you require more light, retractable sunscreens will allow you the option of letting in more sunshine into a room.
  • You can enjoy considerable savings on electricity. Sunscreens keep your house cool even during the hot months because they deflect the heat of the sun. They also allow you to illuminate a room without using electricity. This will help you lower your energy consumption considerably in summer.
  • Apart from providing adequate privacy for you and your family, sunscreens can also be fully customised to cater to your specific requirements. Depending on how dark or how light you want your home to be, your local sunscreen supplier can provide you with a variety of options and help you in your sunscreen needs.

Furthermore, sunscreens also provide protection for you and your family as they effectively block the harmful UV rays from the sun. The same goes for your property as sunscreens ensure that sunlight does not reach your furniture and electronic equipment. You can now improve your home and your quality of life by installing sunscreens on your windows. Make the smart choice and invest in quality sunscreens for your home today.

October 13, 2017 at 1:59 amDirect Service

Press Tools: Proper Care and Use

Industrial toolsA die or press tool is a unique tool used in industries to shape or cut materials. Simple press tools perform piercing and blanking operations in one stroke while compound dies are ideal when you need to perform more than one operation using a single stroke.

These tools are widely used in the fabrication shops, automotive and electrical industries for punching holes. The manufacturing process combines several important steps for a successful punching operation. Here are some factors that will ensure you could maximise efficiency and productivity of your fabrication process.

Optimum Die Clearance

Using a large die clearance results in holes of poor quality and large burrs. Tight clearance reduces the durability of your press tool. The ideal die clearance will depend on the thickness and type of your work piece material. Optimising the clearance of your die is an essential factor to a successful punching process.

Good Slugs

The slugs are the spitting image of your holes. Check if the fracture plane and burnished land are regular along the periphery of the slug. This will indicate that the machine is aligned properly. A good slug is a sign that the press tool is operating at its maximum efficiency and that there are maximum breaks between regrinds.

Quality Punching Tool Parts

Your press tools should have features that lessen the effects of tensile forces applied to the punch’s tip. Small back tapers can reduce pressure on your punch flanks. Using high-quality steel tools will minimise wear, cracking and chipping of your punch. Guided tool holder systems are stronger and longer lasting compared to unguided ones. They also produce parts that are of higher quality with larger spaces between regrinds.

Proper maintenance of your tools is essential for a good punching job. Follow your manufacturer’s recommendations for the lubrication, sharpening and maintenance of your press tool. Proper evaluation of the punching operation is sure to lead to higher profitability and productivity.

September 30, 2017 at 1:00 amDirect Service

Proven Tips for Keeping Your Car Running and Looking Great

Examining the EngineCar care is not a hobby limited to those who consider themselves as car enthusiasts; it’s a part of car ownership. As your car is perhaps the most expensive purchase you’ll ever make next to your house, it’s only sensible to keep it cared for enough to make it last.

Here are some tips to make sure your car stays in good condition for as long as possible.

Change the Oil and the Filters

Your engine oil lubricates all parts of the engine, keeps the engine cool, protects it from excessive wear and removes dirt to keep it from damaging the engine. The life or viscosity of engine oil has a limit, though. To make sure your engine is not damaged, replace the oil on the recommended schedule, which you can find in your owner’s manual. Replace the oil filter as well as the other filters (air, fuel, etc.) according to the manual.

Keep It Clean

Keeping your car clean can protect the paint from oxidation, which may cause dullness and even rusting. Wash your car every week or two with a safe automotive shampoo recommended for your car’s coat, and apply a coat of wax every three to four months. Remove bird droppings and tree sap as soon as possible. Avoid parking it near sprinklers to prevent ugly water spots that can etch your paint.

Keep it in the garage and away from the elements. If you don’t have a garage or a shaded parking area, think about industrial storage tents like Dome Shelter Australia. A high-quality, sturdy tent is a worthy investment in the protection of your car.

Maintain the Right Tyre Pressure

Your car came with tyres recommended for its specific model; it’s best to stick with that type of tyres. Follow the cool tyre pressure indicated on the sticker on your door jamb. The right tyre pressure ensures your tyres are inflated for minimal wear and longer life, as well as maximum fuel economy.

Avoid Using Non-Recommended Parts

Car customisation is a huge market with many enthusiasts, but customising your vehicle is not something manufacturers are likely to encourage. You may end up using parts not recommended for your vehicle, eventually damaging it. Customising your car is also very liable to void the warranty.

Follow these tips to keep your car running in like-new condition and looking as if you just drove it out of the showroom. These tips can also help prevent expensive repairs in the future.

May 10, 2017 at 3:41 amDirect Service

What Does It Mean to Be an Owner-Builder?

Man standing inside a house that's being builtThere’s nothing more satisfying and gratifying than building a home on your land with your sweat, tears, and blood. In Australia, that makes you an owner-builder.

Despite the greater control and satisfaction being an owner-builder gives, it still comes with responsibilities you should never fail to forget. These include the following:

Permits and Licences

As the owner-builder, you are responsible for getting the necessary permits and licences before you even commence construction work. In Sydney, for example, you need to secure an owner-builder permit if your building work is more than $10,000 and the council requires you to have development consent.

Please note that as an owner-builder, you should be constructing a residential property you intend to live in once the project is complete.

Partners

You cannot expect yourself to know everything there is about construction work, so you need to hire experts and contractors to help you out. You can deal with a hardware supply company that can give you not only building materials but also other necessary services such as installation and design.

Australia allows you to enter into partner agreements with suppliers and contractors, but keep in mind some regions like Victoria may require a domestic building contract if the value of their services are beyond $5,000.

Responsibilities

Besides getting the right permits, as the owner-builder, you must secure the right and sufficient insurance coverage for your workers, ensure that the home follows the building standards and local regulations, and process completed work certification.

In Victoria, you need to have a construction induction training card from WorkSafe Victoria once your area becomes a workplace (based on the law’s definition). To get this, you should attend a construction induction training.

With your right to build on your land is the responsibility or duty that guarantees safety and compliance. Remember these, and you’ll have a better experience in being an owner-builder.

April 4, 2017 at 5:31 pmDirect Service

Spotting Termite Infestation in Indiana

Termite Infestation

Termite infestation is a serious home problem. It is responsible for more than $5 billion of damage to properties, primarily homes, every year! The bigger issue is this is usually not covered by standard home insurance policies, as they insure damages caused by natural disasters.

What can a homeowner do, then? Simple: pay attention to their presence and get rid of the infestation before it gets worse. Here are some of the most common signs:

Mud Tubes and Tunnels

Seemingly random linear patterns that run on the walls may need further investigation. Pest control companies say there’s a good chance they are mud tubes built by termites to transport themselves to their food source, which is wood. If you look underneath the homes and see tunnels, it’s possible you have a growing subterranean termite colony.

Hollow Sound of Wood

If you think you have a termite infestation, try boring a hole and accessing the wood part of your home’s structure. Knock on the wood. Listen. Does it sound like the wood is hollow on the inside? You may have a termite infestation.

Season

Springtime’s here. This is the best time to start checking your home for any presence of termites. Subterranean termites tend to swarm during this season, while the drywood termites, although rare in Indiana, can form a colony during the summer.

Noise

Termites do make noises, especially when they feel threatened or disturbed, but you may not hear them because of the concrete. A company specializing in pest control in Indiana can help you. It’s usually equipped with meters and other tools that can detect termite presence even if you don’t hear the noise or see any of the other signs.

Termites should thrive outside, not in your home. Don’t wait for them to create serious damage to your home’s structure. Be more attentive to the warning signs.

 

March 13, 2017 at 2:33 amDirect Service

Stay on the Sport with Ski and Snowboard Rental and Repairs

Snowboarding in VailYou can only know how to ski and snowboard when you have the actual equipment needed for the sport. First-time skiers should know better than everyone else should that having the right equipment is the only way to stay on the snow.

If this is the first time on the snow, skiing or snowboarding, consider searching for reputable Vail ski rental shops for the best in skiing and snowboarding gear.

Request for Recommendations

Referrals are by far the best when it comes to finding reliable snowboarding repair shops. You can never go wrong by asking for advice from a competent person. Alternatively, you can get a referral from a close friend or relative who has gone through the sporting experience in the town.

Research Online

What are people saying about the available shops in Vail? Online reviews are quite handy when you do not know anyone who has enjoyed the skiing and snowboarding experience in Vail. Find out as much information as possible from experienced customers before making any decision. Consider looking at different comments to get a clear picture of what to expect in the area.

Visit Different Shops

Visiting the land-based store once you have singled out a couple of stores is probably the next step you should make. Look at the facilities on offer at these shops. Discover how the equipment at the shop are maintained and whether they meet safety standards.

Do not be afraid to walk away if you are not interested in what you see. You might probably end up getting better services and better equipment from other shops. Take time and countercheck your options to hone your chances of finding what you need.

November 24, 2016 at 9:08 amDirect Service

The Fun & Proven Health Benefits of Bouncing on Trampoline

TrampolineEverybody loves jumping and having fun around a trampoline. Bouncing on and off provides a great experience for both kids and adults. It brings in joy and excitement one can never find in any activity out there, but did you know that trampolines also offer a number of health and fitness benefits to your body? Here are some reasons why.

It Makes Losing Weight Fun & Easy

A recent study by NASA reveals that spending an hour of bouncing on rebounder burns more calories as compared to an hour of jogging or running. Jumping on a rectangular trampoline is also considered as a metabolic activity. This means the practice does not only improve your breathing but is also an effective way to shed off unwanted fat in your body.

Helps Improve Body’s Lymphatic Flow

The lymphatic system is responsible for eliminating toxins, waste and unwanted elements in the body. It literally functions as the human’s metabolic wastebasket. To ensure the flow of the lymphatic system, there should be constant movement around the body. In other words, if there are no activities, then it cannot serve its sole purpose. This is where the importance of trampoline comes in. A good 10 minutes up and down motion around the rebounder is more than enough to promote lymphatic flow around your body.

Provides Anti-Aging Benefits

Bouncing up-and-down on a trampoline counteracts the early stages of aging. Going through the process regularly can make your muscles firmer, tighter, and stronger. This will then prevent the sagging of skin which is the obvious sign of aging.

Develops Coordination & Balance to Body

Maintaining a good balance and coordination in your body allows you to control every movement smoothly and efficiently. This is necessary, especially when performing a given task. It retains the overall function the body’s basic senses. This is also a good way to reduce the possible risk of postural problems which are extremely difficult to control and manage.

It Reduces Stress & Tension in the Body

People of all ages may suffer from stress and body tension at any given moment. In turn, this may cause you to feel restless and tired most of the time. Fortunately, there’s a way to fight back this condition and that is through the help of a trampoline. Diverting some of your energy into jumping and bouncing positively affects the body which lessens the chances of insomnia or lack of sleep.

Trampolines are indeed a great way to maintain healthy mind and body. Aside from that, it is a fun activity that can be enjoyed by anyone, from kids, teens to adults.

November 7, 2016 at 6:27 pmDirect Service

Tips on How to Buy A Great Pair from a Jewellery Manufacturer in UK

JewelleryEven in the past, jewellery has been bought and exchanged as an aesthetic piece. The process of how they have come about might have changed, but their intrinsic value has remained the same. If you are one of those who are on the lookout for a good piece, JewelCast ltd notes that you might want to keep in mind a few things.

Different Metals Have Different Values

Each piece of metal and each gemstone have its value. Generally, this value depends on how rarely they occur naturally, the purity of the gemstone, the tensile strength of the metal, and the colour that it has. That being the case, you need to familiarise yourself first with the different factors before you make any purchase.

Reputation of the Manufacturer

Pieces of jewellery go through a process before they can be a display piece. Each jewellery manufacturer, however, makes use of their own method to produce a certain piece. Now, regardless of the process that they use, certain manufacturers stand out because of the quality of their work.

That said, make sure you do your own research to see which jewellery manufacturer has the best feedback from clients. Keep in mind also that some manufacturers also provide extra services such as resetting of stones as well as polishing of metals.

Your Budget and the Occasion

It is very easy to pick out just about any jewellery; however, you also need to consider what your budget is as well as what the occasion is. Weddings and proposals are some of the top reasons for getting jewellery. If that is the case, you might want to focus on getting a diamond set in a silver or gold band.

If you are picking out a jewellery piece for yourself, you also need to consider what metal would enhance your looks and which gemstones should go with it.

August 23, 2016 at 7:25 amDirect Service

Are You Ruining Your Roof? Costly Mistakes to Avoid

Roof Maintenance in TaurangaWhen the rain comes down, it helps to have a secure roof. A good roof is impervious to the amount of rainwater beating on it with every passing minute. A solid roof withstands not only the falling rain, but also the gusty blowing winds. Good workmanship, proper roofing installation and routine maintenance ensure that your roof remains in good condition for many years. Depending on the material, some roofs can have a lifespan of over 50 years.

Making any of these roofing mistakes cuts down the lifecycle of your roof. Make sure you avoid doing them:

Attempting to DIY

While Tauranga roofing experts take many factors in mind, such as weight, materials, durability and cost, Kiwispout NZ LTD noted that most homeowners are likely to consider style and price alone. Consequently, they might end up with the wrong type of roof. Combining it with inadequate installation skills, this could lead to an absolute disaster. An improper arrangement of shingles and other roofing accessories often leave the roof weak, unappealing and dysfunctional, making it susceptible to water leaks.

Installing Improperly

Failing to install starter shingles, improper use of nails and improper installation of valley flashing are some of the most common mistakes that make roofs prone to leaks. Failure to consider the slope when buying roofing materials may leave your home susceptible to leaks, as well. Imperfect shingle alignment leaves gaps in the roof through, which the water can seep into the house. Insufficient overhang allows water to reach your fascia boards.

Recycling Roofing Materials

As tempting as it is, you should avoid recycling old roofing materials to save some money. It’s a sure way to ruin your roof. When materials do not align properly, there will be room for moisture to seep into the house through the chimneys, skylights and roof alleys.

Avoiding these roofing mistakes should save you thousands of dollars in repairs fees and increase the lifespan of your roof. Take note of them and save your finances from frequent repairs and replacement.

April 1, 2016 at 5:23 amDirect Service