Post Tagged with: "Manufacturing"

Fastener Materials: A Look at Different Types

SteelIn construction, each part to make a whole, no matter how small or simple it is, matters. Therefore, part of usual maintenance instructions in machines is the checking of screws and bolts, aside from the usual inspection of bigger parts.

Like main parts, however, small fastening tools are also made up of different materials. Your supplier might recommend stainless steel bolts and nuts for one project and brass bolts and nuts for the other.

But why is there a need for such distinction? 

Steel

This is the most common fastener material due to its strength and durability. Steel fastener comes in a variety of types, like stainless steel, galvanised steel, and alloys, among others. It also comes in various bolt grades: Grade 2 is the standard bolt type usually found in hardware stores.

Grade 5 is stronger than Grade 2 and people use them in automotive materials, while Grade 8 is stronger than Grade 5 and used for more demanding automotive parts.

Aluminium

This is the least costly among all the other types of fastener metals, known for its light, soft and corrosion resistant properties. Aluminium fasteners also come in different grades and are sometimes equal or exceed the tensile strength of mild steel.

Brass

Brass can easily be shaped into anything and still remains strong and durable. It is nonmagnetic and has a higher degree of lustre. Unlike steel and aluminium, however, brass is worked by using cold temperature.

Copper

Copper has a high conductivity and malleability. Aside from that, copper is also a popular choice in construction because it is corrosion resistant. Although classified as non-precious metal because the world is abundant is copper supply, the quality of fasteners from copper is also notable.

So, the next time you have a construction project, take note of the fasteners that you will be using. They play a huge role in the success of your project. 

December 5, 2017 at 1:00 amInfo Tech

Top Benefits of Using AG Track Systems

 http://www.tuffstuffaustralia.com.auMost industries are moving from using wheels in earth moving vehicles to track systems. That is because track systems offer greater versatility and high stability. In farming, there can be no system that will provide more traction.

One of these track systems is the AG track systems, which come with the following features:

1. Traction

It is only on the recommended track system that your earth moving vehicle can perform optimally at full power. You affect the level of traction control when you have to either slow down or block one track to turn your earthmoving vehicle, which is common in two-track earth moving vehicles.

You can opt to change to four-track systems to keep the grounds you are working on in the best condition after the turns as your earth moving vehicle will distribute evenly and more efficiently its power from the tracks to the ground. This process reduces chances of skid and slip, and your earth moving vehicle consumes less energy.

2. Comfort

Using recommended track systems will raise the stability of your earthmoving vehicles which further enhances comfort. You now also can work on tough terrains and other areas that you could not access with a wheeled earth-moving vehicle. Excellent stability is also critical for operational safety.

3. Floatation

Using dual wheels is quite limiting as some parts of Australia have restrictions of the earth moving vehicle width you should use. With the right choice of track systems, you can avoid limiting your applications to only areas that have these width restrictions. Such track systems also provide high flotation with minimal interference on earthmoving vehicle width.

Depending on your area of specialisation, you can ask your undercarriage parts provider to supply you with a track system that can offer a footprint of your liking.

One of the notable advantages of using AG track systems is that they reduce the impact that your earth moving vehicle has on the ground. Look for the above features when you are choosing track systems to find the best for your vehicle.

October 14, 2017 at 1:00 amDirect Service